Protecting Your Shed

| Tuesday, May 10, 2011
By Bill Johnson


It truly is extremely important for you to preserve your brand-new wood sided shed with stain or paint as soon as possible once you've crafted it, or once you had it installed using a shed company. Three of the most frequently used kinds of wood siding for sheds are pine, cedar, and Texture 111.

Many people are of the opinion that cedar siding, whether it is tongue & groove boards or clapboards, doesn't need to be protected. This really is far from true! While cedar is far more rot-resistant than pine or Texture 111, and normally would endure a little longer if left unprotected, it's still wood and will degrade inevitably. Cedar is often used when insects including carpenter ants or termites can be found or likely, given it does have a natural repellent contained in the wood that the bugs will stay far away from.

One other two styles of siding: pine and Texture 111, will rot before long if left unstained or unpainted. These varieties of siding are normally kiln dried via the lumber mill but, if allowed to remain unprotected, the wood will begin to turn a dull grey color since the dry wood absorbs moisture into the pours. In the long run, the moisture works its way deep inside the boards, turn them a black color, and will rot them via the internally. Areas of the shed most susceptible to this matter are the areas that happen to be near the earth, since rain falling from the sky or running off the roof will splash up from the ground and really soak the wood. This really is usually much more of a problem around the sides of the shed that won't acquire much sunshine mainly because it will take much longer for it to dry.

So, exactly what is the best way to shield your shed? There are basically two trains of thought in this area. A veteran "house painter" will probably inform you to select a premium primer, and apply at least 1 coat, and possible two, particularly over the knots. Then apply a coat of a high-quality exterior paint. Generally speaking, with paint, you get what you pay for. It's always worth a couple of extra dollars per gallon of paint to obtain a better quality product. There is one major downside of paint, however. Before long it will start to peel and flake off and will call for considerable sanding and scraping to ready it for the next coat of primer and/or paint.

An additional option might be advice you will probably get from an experienced "wood worker", which probably would be a good quality stain. The key distinction between paint and stain would be the fact paint simply coats the surface of the wood, which can be an easy way to preserve it. However, stain actually takes up into the pores on the wood, also providing good protection. The main benefits of making use of a stain is the fact that there exists very little preparation required, for example priming, and simply because the stain ages, it'll not peel or flake like paint. It may begin to take on a dull or chalky appearance however when that happens, you just need to just wash the shed and apply another coat of stain...no sanding or scraping required. And, since 1 gallon of stain will cover about the same as two gallons of primer & paint you would certainly have to get, there should be a considerable cost savings in the process.




About the Author:



0 comments:

Post a Comment