When the holiday season comes around, people often cast envious eyes at a house that is lit up with bright lights. With some simple Christmas light installation tips it is easy to make a home the talk of the town. Normally, the style of decoration you chose will most likely depend on the type of house to be done up.
Each house has a different character and style and is more suited to some lights than others. For example, a Victorian house is more likely to need a different style of Christmas lighting than, say, a ranch. Bear this in mind because your neighbors may well have lights that are suited to the style of housing in the neighborhood and if you shy away from the norm you may feel embarrassed.
Lights in rows or strings seem to be very popular and appear to be the style of choice. Whatever you chose needs to be checked over thoroughly, specially if you're using last years lights as these could have frayed wires. It has been recommended that you toss out any wires that are frayed because they pose an electrical risk.
Power supplies that are closest to the rooftop are the best to use and sometimes these are located near the porch. If a power source on the side of the house is to be used make sure that this is well protected from the elements as well as from sprinkler systems.
It should go without saying that using the right tools will greatly enhance safety. A ladder is perhaps the one thing that will be used the most often and it should be stable when placed on the ground. Having a neighbor or friend on hand to steady the ladder when you're on it might be a good idea. If they can help with carrying decorations too that would be a bonus.
If working alone, one option is to use a bucket or basket to haul materials up and down as you work. Going up and down the ladder multiple times obviously increases the risk of falling so keep these trips to a minimum. If you cannot reach something do not lean over to try and reach it, the wise thing is to move the ladder rather than risk toppling and falling.
When using fasteners to help secure the lights to the property, it is best to try and use ones that do not contain metal. Metal fasteners can have a propensity to rust when exposed to the elements. Plastic and rubber fasteners are resistant to water and they have no conductive powers, which means no electric shocks. They should be placed at equal distances and obviously the electricity should not be turned on before all the lights have been switched on.
The most obvious part of Christmas light installation is to hang them around the property. Starting at the power source, work your way around the fasteners until you come to the end. After doing the house you can do the fence, tree and create a spectacle that could have people casting envious eyes at your home.
Each house has a different character and style and is more suited to some lights than others. For example, a Victorian house is more likely to need a different style of Christmas lighting than, say, a ranch. Bear this in mind because your neighbors may well have lights that are suited to the style of housing in the neighborhood and if you shy away from the norm you may feel embarrassed.
Lights in rows or strings seem to be very popular and appear to be the style of choice. Whatever you chose needs to be checked over thoroughly, specially if you're using last years lights as these could have frayed wires. It has been recommended that you toss out any wires that are frayed because they pose an electrical risk.
Power supplies that are closest to the rooftop are the best to use and sometimes these are located near the porch. If a power source on the side of the house is to be used make sure that this is well protected from the elements as well as from sprinkler systems.
It should go without saying that using the right tools will greatly enhance safety. A ladder is perhaps the one thing that will be used the most often and it should be stable when placed on the ground. Having a neighbor or friend on hand to steady the ladder when you're on it might be a good idea. If they can help with carrying decorations too that would be a bonus.
If working alone, one option is to use a bucket or basket to haul materials up and down as you work. Going up and down the ladder multiple times obviously increases the risk of falling so keep these trips to a minimum. If you cannot reach something do not lean over to try and reach it, the wise thing is to move the ladder rather than risk toppling and falling.
When using fasteners to help secure the lights to the property, it is best to try and use ones that do not contain metal. Metal fasteners can have a propensity to rust when exposed to the elements. Plastic and rubber fasteners are resistant to water and they have no conductive powers, which means no electric shocks. They should be placed at equal distances and obviously the electricity should not be turned on before all the lights have been switched on.
The most obvious part of Christmas light installation is to hang them around the property. Starting at the power source, work your way around the fasteners until you come to the end. After doing the house you can do the fence, tree and create a spectacle that could have people casting envious eyes at your home.
About the Author:
You can visit the website www.russelwilliams.com for more helpful information about Christmas Light Installation Need Not Be Difficult
0 comments:
Post a Comment