Process Of Doing House Washing

| Tuesday, April 29, 2014
By Heidi Carver


Doing a house wash is done by using a high velocity spray for water. It would clean the dirt and residues on the outer side of the house. This type of cleaning your place is needed especially if you want to paint or just repaint your home. If its surfaces are clean, it could make the paint last for so long.

There are equipments used in this way of cleaning. You can use these washing equipments on most of the type of housing materials as long as you learn the procedures of washing. You can check on house washing Pensacola FL if you want to know more about this. You can contact one so they can do it for you. But, you can also do it yourself.

Pensacola is known as the first European settlement in North America. It is located in the state of Florida. Pensacola FL is a family friendly destination. You can enjoy a lot of activities good for children and adults. You can also find some of the best home washing services in the area.

First in the process of cleaning it is selecting a washer that will be suitable for that work. There are housing materials which are capable to withstand the pressure of the water. If the material is soft, it is best to utilize a washer which has 1200 until 1500 psi as it cannot create damages on a material. If the material is strong, one should utilize a washer which has 2500 until 3000 psi. That machine can clean faster and better than others. If a person wanted to use detergent, he needs to use a washer with a built in dispenser for detergent.

If you are going to clean around a landscaped area or lights, you should cover it with cloth. You can also cover it using a plastic sheet. Secure the cover using a duct tape. This should be covered so that it will not be harmed by the pressure of water.

If there is a visible mold on a surface, you could scrub it manually. After doing that, mix 1 lb non phosphate concentrated cleaner and 4 gallons water. Mix them together and put it inside the dispenser.

Connect the hose which connects to a water supply to the washer you would use. After doing that, turn on that machine. Test the pressure before using. Hold its nozzle with both of your hands as far as 3 feet from your wall. Move the nozzle closer until the pressure has enough strength to remove dirt but not too strong as it will cause damage.

Start from the upper part of the house and then going to the lower part. Move the nozzle slowly from side to side. After that, rinse it starting from the upper part going to the lower part. Let it dry for about two days or more.

This way of cleaning the house is important especially if the outer part of the home already has molds. It will affect the look of your home. This dirt is also not good for the health. This is a great way to make sure that your home is always clean.




About the Author:



0 comments:

Post a Comment